Ships In: Ships Directly from Supplier ? "Ships in" reflects an estimated lead time before this item will leave via the shipping method selected.Please Note: Selecting an expedited shipping method during the checkout process will not change the "Ships in" time frame.
IE VW & Audi 2.0T Gen 3 IS20 MQB Performance Stage 1 Tune | Fits MK7/MK7.5 GTI, GLI, & 8S TT, 8V A3 2015+
On all orders over $99.00
7 days money back gutarantee
We support 24/24h on day
Safe shopping guarantee
This tune is for 2.0T engines with IS20 turbo only and does not support 8V A3 with 1.8T engines. Does not support 2017+ Audi A3 with front wheel drive (FWD).
IE ECU calibrations are dedicated to perfecting every section of the mapping to deliver a fully realized performance file right out of the gate. Maximized for full performance potential on the drag strip and road coarse while maintaining full comfort and reliability on your daily commute. Get ready to experience IE's Performance Software For your VW GTI, GLI or Audi A3 and TT in only minutes from the comfort of your garage or driveway.
HIGH/LOW TORQUE FILES
IE High Torque ECU calibrations maximize power gains throughout the entire powerband which quickly exceeds the torque limitations of the factory DSG calibration (auto trans) or the stock clutch (manual trans) that leads to clutch slipping. Stage 1 and Stage 2 files include optional Low Torque files for vehicles with stock DSG tune or stock clutch. Both high and low torque files are included and can be switched between as often as you like. High Torque files require the additional purchase of a DSG transmission tune to reliably take advantage of the intense power.
Stage 1 Tune HP and TQ numbers
| Stock VW/Audi advertised numbers | 210 HP | 258 FT-LBS |
| Stock IE dyno numbers | 237 HP | 298 FT-LBS |
| Stage 1 91 AKI / 95 RON | 304 HP | 385 FT-LBS |
| Stage 1 93 AKI / 98 RON | 310 HP | 389 FT-LBS |
Required Hardware for Tune
| Required | *Notes | |
| IE POWERlink Cable | YES | REQUIRED TO INSTALL TUNE |
| DSG TUNE OR CLUTCH UPGRADE | NO | REQUIRED FOR HIGH TORQUE FILES |
| AIR INTAKE | NO | |
| INTERCOOLER | NO | |
| TURBO INLET PIPE | NO | |
| CATBACK EXHAUST | NO | |
| HPFP UPGRADE | NO | REQUIRED FOR ETHANOL USE |
| TRUEFLEX SENSOR HARNESS KIT | NO | SUPPORT COMING SOON |
| DOWNPIPE | NO | Not Compatible With Stage 1 |
| TURBO UPGRADE | NO | Not Compatible With Stage 1 |
Upgrading to higher tunes
Upgrading from Stage 1 to Stage 2 or beyond is easy! With IE, you only pay the difference in tune cost with no extra fees. When you install the required matching hardware, simply follow the link on your IE POWERlink software to purchase the tune upgrade and you will be blowing away the competition in minutes!
Toggle Features
Simply plug-your IE POWERlink to quickly turn on optional features such as the included exhaust crackle. The process is the same as adding a tune and can be turned off just as easily.
Code Reader
Pesky check engine light turn on? Save a trip to the shop and use your IE POWERlink to diagnose the problem. The easy to use code reader will pull up any trouble codes and once the issue is fixed, clear the code and get back to the fun.
Data Logger
Verify the healthy operation of your engine using the built-in data logging function. Nothing is better than a piece of mind that your investment is operating optimally. First time data logging? This article will help show you the ropes: How To Data Log
