High Pressure Fuel Pump (HPFP) for 2.0T FSI Engine

This mechanical high pressure pump runs off a lobe on the intake camshaft.  The HPFP is located on the drivers side front of the engine at the top.  The FSI pump is prone to failure and may cause running issues along with a check engine light.  There is also a newer version of the intake camshaft 06F-109-101-J.  You should check your cam lobe for wear to ensure that it is in good condition.  

 

Faults sometime associated with the failure of this part

- P0087 Fuel Rail / System Pressure - Too Low 

 

It is also advised the cam follower is replace when installing this fuel pump

Cam Follower for 2.0T FSI engines  06D-109-309-C

 

Previous Versions 06F127025K, 06F127025J, 06F127025F, 06F127025H, 06D127025B

 

We advise that all diagnostic be checked by an automotive proffesional to ensure the symptoms apply to your vehicle. 

Associated parts
Mounting Bolts for Fuel Pump (Qty 3 total required) N-910-896-01

Banjo Bolt (Only early 2006 cars) for FSI Pump WHT-000-285-C

Adapter for Banjo Bolt (If you cant swap from orig pump) 06F-127-213-B