Ships In: 1 Business Day from our Facility ? "Ships in" reflects an estimated lead time before this item will leave via the shipping method selected.Please Note: Selecting an expedited shipping method during the checkout process will not change the "Ships in" time frame.
Spool Valve Removal Socket (T10352/4) for Gen 3 1.8t and 2.0t
On all orders over $99.00
7 days money back gutarantee
We support 24/24h on day
Safe shopping guarantee
This special tool is to remove the oil control valve for the variable valve timing located at the end of the intake camshaft. This special tool would be required to remove your cam bridge, camshaft, cylinder head, or replace your timing chains.
This socket would be most commonly used on the 3rd Generation of the 2.0t and 1.8t TSI engine, commonly found in a variety of MQB/MK7 models. There are a variety of these special tools that look the same, with a minor difference in the offset of pins. Make sure you have the correct valve for your car via the application data.
This spool valve socket uses offset pins and is to be used with the following part numbers. These are generally found on vehicles produced 2017 and later. If your vehicle does not use any of the part numbers below, please see tool number WKZ-T10352/2
06K109257C
06L109257D
For Engine Codes *varies by prod date
DBPA - 2.0T Audi
DCGA
DJJA - 2.0T Golf R
DKFA - 2.0T GTI
DLRA - 2.0T Golf R
DLHB - 2.0T Audi
CXCB
CXBB - 1.8T
CYMC - 2.0T Audi
